Archive

Category Archives for "Uncategorized"

How Long Will an RV Fridge Run on Battery?

how long will an rv refro run on battery

RV refrigerator is an essential appliance needed to keep foods fresh and cool while camping in RV. Me and my family always love to go on camping in an RV. Our camping experience would not be complete without a running refrigerator that stores all our food. In order for these refrigerators to run, you need batteries to power them on. But, the question is “How Long will an RV Fridge Run on Battery?”. It is highly important that we know the answer to this question so that we can do some adjustments and prepare ahead. Let us get to know the answer as we get along.

How long will an RV fridge lasts on battery?

How-many-battery-do-I-need-to-run-a-refrigerator

Normally, refrigerators run using AC power. However, when you are out there camping, it is not readily available. Thanks to batteries, having a fridge in RV is still possible. With the help of an inverter, the DC from the battery will be converted to AC to power the refrigerator.

A normal residential refrigerator or an RV fridge that consumes 150 watts of power would approximately draw 12-amp hours from a 12 Volts battery. Under this circumstance, the RV refrigerator could run for about 4 to 5 hours using a single 12 Volts battery that can supply 100 amp-hours.

Most Dometic refrigerators specifically made for RV can run approximately 6 to 8 hours on a single 12 Volts DC battery.

For a smaller RV fridge that only consumes less than 70 watts of power can last up to 30 hours with a single 12 Volts battery.

What are the factors affecting the running hours of an RV fridge?

How-long-will-a-deep-cycle-battery-run-a-fridge

There are actually several factors affecting the number of hours an RV fridge lasts. These factors include:

  • Number of amp hours

One of the factors that affect the number of hours RV fridge lasts is the number of amp factors afforded by batteries. This means that if the battery could give more amp hours, the more hours the RV refrigerator can run.

  • Number of batteries

If you have more batteries on hand, then you can run the RV fridge for more hours. Thus, if you expect your RV fridge to run for about 6 to 8 hours with a single 12 Volts battery, then it is much better to load 2 or 3 more batteries to keep the fridge working.

  • Actual power consumption of RV refrigerator

The number of hours is also affected by the power consumption of your RV refrigerator. For instance, if you have a refrigerator that utilizes 150 watts of power, your refrigerator is only expected to last for 4 to 5 hours. On the other hand, if you are using only a 70 watts RV refrigerator, then you can enjoy more hours as compared to a 150-watts refrigerator.

This factor is also affected by the size and age of the refrigerator. With size, the larger your refrigerator the more power it consumes. As with age, the older the refrigerator the more power it also consumes.

Another factor affecting power consumption is how often you use the refrigerator. Thus, using only minimal features will yield lower power consumption.

Tips in Using battery-operated RV Refrigerator

How-long-will-a-12-volt-battery-run-a-refrigerator

Now, that we already have a sort of idea of how long RV refrigerators last using batteries, then here are some tips that you can use to be able to utilize these RV refrigerators for long.

  • Check the actual power consumption of your RV refrigerator

As we have said earlier, one of the factors affecting the number of hours RV refrigerator works is the power consumption of the appliance. To check the actual power consumption of your RV refrigerator, put off all the devices connected to your battery except for the fridge. Then, check the meter reading to see how many amps have been drawn. The amps drawn are on a per hour basis, so you can easily calculate how many hours your refrigerator will work.

  • Get the right battery size

One good way to prolong RV refrigerator use while boondocking is to get multiple batteries connected together. However, there are two ways to connect your battery. One is by connecting it to a series; with this, you don’t increase the amps but only the volts. For example, if you put two 6 Volt batteries, you will have 12 Volts but amp hours will not increase.

On the other hand, connecting batteries in parallel will increase the apps. If you connect batteries in parallel like two 12 Volt batteries, for instance, you will have more than 150 amps.

Therefore, you need to calculate first the power consumption of all appliances before you configure the batteries. You can connect them either in series or parallel to get the required volts or sufficient amps to keep your RV fridge working.

  • Make sure the batteries are in good condition

To ensure that you get to maximize the amp-hours the battery can give, you have to make sure that they are in good condition. Charge it accordingly as instructed. The most common reason why batteries fail is either they are undercharged or overcharged. Make sure the batteries you are going to use do not lose the charge to less than 50 percent.

Conclusion

When you are on a road trip or camping perhaps, a handy RV refrigerator is very important because it will store and keep your foods fresh for consumption. Thus, before you go, you have to make sure that your RV refrigerator can last throughout the whole journey. We hope this article has given you all the right insights regarding how long will an RV Fridge runs on battery and how, in a way, to prolong its use.

How to Manually Retract RV Steps

how to manually retract rv steps

Nowadays, the focus is on the convenience and easy operation of everything which is why almost everything can be automated. This includes the steps of your RV. While automated steps certainly make things convenient and it surely has safety measures to prevent accidents, learning how to manually retract RV steps is important as well.

This is because knowing how to manually retract RV steps will allow you to operate your RV’s steps even when their automated feature is broken.

With that said, here’s a tutorial on how to manually retract your RV’s steps.

What You Will Need

manually-retract-steps

Before we go into detail about how to retract your RV steps manually, let’s first list down everything you need for the task. They are as follows:

  • Pliers (longnose, regular, etc.)
  • Wrench (traditional and adjustable)
  • Screwdrivers
  • RV manual (physical copy or digital)

Step by Step Guide to Manually Retracting Your RV Steps

manually-retract-rv-steps

Once you have prepared all the tools you need for the task, you can now proceed to do the following steps:

1. Prepare your RV.

Make sure to park it somewhere flat, preferably on concrete, and has decent lighting or a light source bright enough to see. To keep your RV from rolling away or onto you while you work, you can place something behind the tires like a large rock. Make sure to clear your work station as well to avoid preventable accidents and injuries.

Preparing your RV and taking the necessary precautions will ensure that you don’t find yourself with an injury or get caught in an accident while manually retracting the steps.

2. Locate the retraction mechanism.

This is usually located beneath the RV steps themselves. To help you with this, you can consult your RV’s manual as it may provide you with the information to correctly locate it. Once you have done so, identify the following parts of the mechanism:

  • Linkage pin or bolt – This links the steps’ frame and the step linkage or the retraction mechanism. This can be in the form of a pin or a threaded bolt and nut.
  • Step frame – This is the steps themselves.
  • Step linkage – This is the mechanism used to automatically retract the steps.

3. Remove the linkage pin or bolt.

steps-not-working

Once you have located and identified everything, you can now remove the linkage pin or bolt. If it’s in the form of a pin, remove the lock pin and then pull out the linkage pin. If it’s a bolt, unscrew it first then remove it.

4. Detach or unlink the step linkage and step frame.

After removing the linkage pin or bolt, you can now detach or unlink the step linkage from the step frame. To be able to do this, you need to slightly pull the linkage out of its link slot. From there, you can easily do the next step which is to retract the steps manually.

5. Manually retract the steps.

Once you have unliked the step frame and step linkage, you can now manually retract the steps. If you want to keep the steps in place, you can use a rope or cord to tie it down and keep them in place.

6. Reattach the linkage when possible.

Once the steps have been manually retracted, you could reattach the linkage if you can do so. Replacing the linkage pin or bolt will help you avoid misplacing important parts and risk having to replace the whole mechanism altogether.

Conclusion

While every step retraction mechanism of RVs is different, these are just some of the basic steps you can take to manually retract them. To ensure that what you’re doing is correct, make sure to check out your RV’s manual as it may provide you with the necessary information for manually retracting your RV steps.

Although most steps are now automated, it’s still handy to have the knowledge of manually retracting your RV’s steps, especially when the automated mechanism is messed up.

With that said, if you enjoyed this tutorial on how to manually retract RV steps, feel free to share them and if you have any questions or concerns, feel free to leave a comment.

How to Remove a Thetford RV Toilet

How to Remove a Thetford RV Toilet

When living in an RV, one of its most essential components is its permanent toilet. For RVs that cost around $100,00, the common standard permanent toilet installed is Thetford toilets. However, sometimes, permanent toilets may need to be removed to be cleaned or to be entirely replaced. If that happens, as an RV owner, you must know how to remove a Thetford Toilet RV toilet on your own.

There are plenty of Thetford RV toilet models, but their removal process is generally the same. Removing it is pretty simple, and you can do it in just under 15 minutes if you follow the steps stated down below.

What to Prepare

Thetford-toilet-removal

Before jumping to the step by step instructions of how to remove a Thetford RV toilet, you must first prepare the following tools:

  • Flathead screwdriver
  • 1/2 -inch socket wrench
  • 12-inch socket wrench extensions
  • Rag

The tools mentioned above are commonly found in standard toolboxes. Also, if you are an RV owner, it is good to invest in these as it may come handy in other situations as well.

The Step by Step Process

How-to-Remove-a-Thetford-Toilet-From-a-Motorhome

If you have all your tools ready, you are now prepared to remove your Thetford toilet. Here are the steps to do that:

Step 1: Turn Off the Water Supply

You wouldn’t want to make a mess by having water splash all over you when you are working. This is why, before doing anything, make sure that your water supply is turned off. Usually, RVs have a water pump switch nearby that you can just switch to “off.” If your RV is connected in an external water source, make sure to disconnect that as well temporarily.

Step 2: Remove the Bolt Cover

RV toilet bolt covers are what make them look seamless. It also keeps the actual bolts from being accidentally unscrewed for whatever reason and from corroding. So, when removing your Thetford toilet, you must remove it.

To do this, you will need to use a flathead screwdriver. Just put the tip of the screwdriver to the seams of the bolt cover and lift up. There are usually two of these, so you just have to do the same step to the other bolt covers.

Step 3: Remove the Actual Bolts

Thetford-RV-Toilet-Repair

Once the toilet bolts are exposed, take your half-inch socket wrench and unscrew it. However, it is only straightforward if the bolts are located on the sides of the toilet. For some Thetford toilet models, reaching the bolts can be difficult, especially the ones that have bolts located in front and at the back of the toilet.

If you have a front and back bolted Thetford toilet, the best way to access the front bolt is by simply pressing down and holding the foot flush lever. On the other hand, to gain better access to the rear bolt, you can lift the seat cover. Then, take away the access hole that is the upper part of the hopper. Once you do this, you can now easily reach the back bolt. After that, use your 12-inch socket wrench extension and unscrew the rear nut.

Step 4: Lift the Toilet

When the bolts are unscrewed, the toilet can now be easily lifted up from its fixed position. When removing it, make sure to have a rag ready and place it immediately in the hole left by the toilet. Doing this will prevent bad odors from the plumbing to come inside the RV. It will also prevent contamination of the black water tank contents.

Easy, right? If the instructions above still sound a little vague for you, here’s a video tutorial from Recreation Destination that you may find handy in removing your Thetford toilet:

Conclusion

Whether you are replacing your RV’s permanent toilet or you just want to thoroughly clean your existing Thetford toilet, removing it off its fixed position is not that hard. All you need to do is carefully follow the steps mentioned above, and you are good to go. Let us know what you think of this tutorial down below and share some of your Thetford toilet removal experience as well.

How to Remove Stains from RV Awning

How to Remove Stains from RV Awning

Do you know someone who just can’t stand seeing stains in their RV Awning? Let me rephrase. Are you the kind who feels irritated or even freaks out when your sight spots a stain in your RV Awning? Surely, these stains will never let you enjoy having quality time in your RV if not removed immediately.

Wouldn’t it be relieving to think that there are actually ways on how to remove stains from RV awning? Yes, you heard it right. You can now break free from enduring hours of removing the stains from your RV Awning. As an RV owner, you would surely find this article helpful for it will give you practical insights – insights already proven effective by many RV owners

What are the types of RV awning materials?

What-is-the-best-cleaner-for-RV-awnings

The idiom “barking up the wrong tree” is quite familiar to all of us. Its relevance to removing stains from your RV awning material is this: to achieve that stain-free RV awning, you must know first the kind of material that the specific awning is made of. By determining the awning material used, you can now properly choose the cleaning agent needed for that awning.

These materials are as follows:

1. Fabric Awnings

The first kind of awning material is called fabric awning. Fabric awnings are often manufactured by Sunbrella. Commonly, they are referred to as “acrylic” or “canvas” and have the following qualities:

  • Breathable
  • Quick-drying
  • UV-resistant
  • Water repellant
  • Oil-based stain resistant

It’s important to note, however, that the repellant eventually fades and loses its effect over time. When this happens, the awning may get damp and might even leak. So, before this creates damage to the awning, make sure to reapply a water repellant to the fabric awning such as 303 Fabric Guard. When left untreated, the stain in the awning could become permanent.

2. Vinyl Awnings

This kind of awning material is mildew resistant but not totally mildew-proof. When mildew forms on the vinyl fabric due to a humid and rainy climate, it would become particularly difficult to remove the stain. Fortunately, this can be prevented when the vinyl fabric is properly treated with 303 Aerospace Protectant, a quality protectant that can keep away the mold and mildew from staining the awning.

3 Easy Steps on How to Clean your RV Awning

How-to-Clean-your-RV-Awnings

As the famous line repeatedly says “prevention is better than cure”, it is indeed always best to prevent stains, leaks, and mildew from damaging your RV awning by following these 3 easy and simple steps:

Step 1: Clean

The key to achieving that squeaky clean look on your RV awning is by using a high-quality cleaner like the 303 Multi-Surface Cleaner. This cleaner effectively removes surface stains on both vinyl and fabric awning materials. This means that even the most stubborn stain, grease, oil, and even mold in your RV awning will be surely wiped out.

Step 2: Protect

After a thorough cleaning, the next step is to give protection to your awning. Fabric awnings are best protected when being treated with commercial-grade fabric guards like the 303 Fabric Guard recommended by Sunbrella. What’s good about this product is that it does not alter the color and texture of the fabric while adding a coat to repel lost water.

For vinyl awnings, a surface protectant like the 303 Aerospace Protectant should be used. This protectant prevents the fading and cracking of your awning, and it can even restore its shine and color. On top of that, it is safe to use because it is water-based.

Step 3: Reapply

The last step is reapplying a protectant spray into your awning. By doing this, you will have an awning that’s cleaner for a longer period of time and even dry much quicker. You will have to worry less about it getting stained.

Conclusion

So, who says that RV awning stains can’t be dealt with? As a matter of fact, it can easily be dealt with given the right attitude, and of course, the right tips. With these two combined, your RV awning will always retain its attractive appearance, the way it should always be.

Have you personally tried some of the tips mentioned? Did you find the tips helpful? Let us know your thoughts in the comments section below.